Product Details:
Payment & Shipping Terms:
|
Features: | Wear Resistance | Product Name: | Flat, Radius And Ballnose End Mill |
---|---|---|---|
Material: | Carbide, Tungsten Carbide | Flute: | 2/4 |
Usage: | Generally High Speed Cutting | Processing Type: | Professional Tool Used |
Color: | Black, Gold And Blue | ||
High Light: | tungsten carbide milling cutters,carbide square end mill |
End mill is the most widely used type of CNC machine tools, end milling cutter cylindrical surface and end face have cutting cutter, they can be cut at the same time, also can be cut separately.Mainly used for plane milling, groove milling, step milling and copying milling. Tungsten carbide end mill commonly have two kinds of materials: high-speed steel, hard alloy.The latter relative to the former high hardness, cutting force, can improve the speed and feed rate, improve productivity, make the knife is not obvious, and the processing of stainless steel titanium alloy and other difficult materials, but the cost is higher, and in the case of rapid alternating cutting force is easy to break the knife.
Milling cutters/end mills are broadly divided into:
1. Square end mill: finish milling or rough milling, milling grooves, removing a large number of blanks, small-area horizontal plane or contour finishing;
2. Ball end milling cutter/end mill: semi-finishing and finishing of curved surface; the small blade can finish milling small chamfer of steep surface/straight wall.
3, Radius end mill: rough milling when the surface change is small, the small concave area is less, and in relatively flat area.
4. Taper end mills: with chamfer, it can be used for rough milling to remove a large number of blanks, and it can also be fine-milled with a small chamfer on the flat surface (relative to the steep surface).
5. Dill
6. Thread mill
7. Formed cutter
Specifications
HRC55 Tungsten carbide end mill
Blade diameter range from 0.5mm-10mm, helix angle 35°, hardness: HRC55, suitable for medium and high speed; Features: micro-particle cemented carbide material, WC=88%, CO=12%, TRC>4300N/m2, particle size: 0.5 Um, ideal for carbon steel, alloy steel, stainless steel cast iron mold
3 flute 45 degree spiral carbide end mill
Type | Blade diameter | Blade length | Shank diameter | Total length |
1.0×3×4D×50L×3F | 1 | 3 | 4 | 50 |
1.5×4×4D×50L×3F | 1.5 | 4 | 4 | 50 |
2.0×6×4D×50L×3F | 2 | 6 | 4 | 50 |
2.5×8×4D×50L×3F | 2.5 | 8 | 4 | 50 |
3.0×8×4D×50L×3F | 3 | 8 | 4 | 50 |
3.5×10×4D×50L×3F | 3.5 | 10 | 4 | 50 |
4.0×11×4D×50L×3F | 4 | 11 | 4 | 50 |
3.0×8×6D×50L×3F | 3 | 8 | 6 | 50 |
3.5×10×6D×50L×3F | 3.5 | 10 | 6 | 50 |
4.0×11×6D×50L×3F | 4 | 11 | 6 | 50 |
4.5×13×6D×50L×3F | 4.5 | 13 | 6 | 50 |
5.0×13×6D×50L×3F | 5 | 13 | 6 | 50 |
5.5×13×6D×50L×3F | 5.5 | 12 | 6 | 50 |
6.0×15×6D×50L×3F | 6 | 15 | 6 | 50 |
7.0×16×8D×60L×3F | 7 | 16 | 8 | 60 |
8.0×20×8D×60L×3F | 8 | 20 | 8 | 60 |
9×20×10D×75L×3F | 9 | 20 | 10 | 75 |
10×25×10D×75L×3F | 10 | 25 | 10 | 75 |
11×25×12D×75L×3F | 11 | 25 | 12 | 75 |
12×30×12D×75L×3F | 12 | 30 | 12 | 75 |
14×35×14D×100L×3F | 14 | 35 | 14 | 100 |
16×40×16D×100L×3F | 16 | 40 | 16 | 100 |
18×45×18D×100L×3F | 18 | 40 | 18 | 100 |
20×45×20D×100L×3F | 20 | 45 | 20 | 100 |
4 flute 45 degree spiral carbide end mill
Type | Blade diameter | Blade length | Shank diameter | Total length |
1.0×3×4D×50L×4F | 1 | 3 | 4 | 50 |
1.5×4×4D×50L×4F | 1.5 | 4 | 4 | 50 |
2.0×6×4D×50L×4F | 2 | 6 | 4 | 50 |
2.5×8×4D×50L×4F | 2.5 | 8 | 4 | 50 |
3.0×8×4D×50L×4F | 3 | 8 | 4 | 50 |
3.5×10×4D×50L×4F | 3.5 | 10 | 4 | 50 |
4.0×11×4D×50L×4F | 4 | 11 | 4 | 50 |
3.0×8×6D×50L×4F | 3 | 8 | 6 | 50 |
3.5×10×6D×50L×4F | 3.5 | 10 | 6 | 50 |
4.0×11×6D×50L×4F | 4 | 11 | 6 | 50 |
4.5×13×6D×50L×4F | 4.5 | 13 | 6 | 50 |
5.0×13×6D×50L×4F | 5 | 13 | 6 | 50 |
5.5×13×6D×50L×4F | 5.5 | 12 | 6 | 50 |
6.0×15×6D×50L×4F | 6 | 15 | 6 | 50 |
7.0×16×8D×60L×4F | 7 | 16 | 8 | 60 |
8.0×20×8D×60L×4F | 8 | 20 | 8 | 60 |
9×20×10D×75L×4F | 9 | 20 | 10 | 75 |
10×25×10D×75L×4F | 10 | 25 | 10 | 75 |
11×25×12D×75L×4F | 11 | 25 | 12 | 75 |
12×30×12D×75L×4F | 12 | 30 | 12 | 75 |
14×35×14D×100L×4F | 14 | 35 | 14 | 100 |
16×40×16D×100L×4F | 16 | 40 | 16 | 100 |
18×45×18D×100L×4F | 18 | 40 | 18 | 100 |
20×45×20D×100L×4F | 20 | 45 | 20 | 100 |
Applications
1. Suitable for Copper, Cast Iron, Carbon steel, Tool steel, Mould steel, Die steel, Stainless steel, Plastic, Arcylic, etc.
2. Applicated for Aerospace, transportation, Medical equipment, military manufacturing, mould development, apparatus and instrument, etc
Contact Person: Sales Manager
High Toughness Standard Size Solid Carbide Blanks / Carbide Flat Blanks
Abrasion Resistance Smooth Tungsten Carbide Flat Bar For Producing Cutting Tool
Superior Heat Stability Tungsten Carbide Bar For Hard Wood Anti Deformation
High Erosion Resistant Tungsten Carbide Saw Tips High Toughness Anti Corrosive
Solid Tungsten Carbide Tool Tips , Tungsten Saw Tips Good Cutting Effect
0.8um Particle Tungsten Carbide Lathe Tips , Durable Cemented Carbide Tips
Solid Tungsten Carbide Bar Used As Wear Parts YG6/YG8/YG10X/YG20C Grade
Woodworking Tungsten Carbide Bar High Hardnes Excellent Wear Resistance
Customized Size Tungsten Carbide Flat Stock , Carbide Tool Blanks High Strength