Payment & Shipping Terms:
|Product Name:||Carbide Inserts For Foundation Drilling Tools And Mining Tools||Alloy Specification:||YG6/YG8/YG10X/YG20C|
|Particle:||Medium / Coarse/ultra Coarse||TRS(Mpa):||2800|
|Material:||Original Tungsten Carbide Material||Surface:||Blanks Unground/ground/Polished|
rock carbide drill bits,
cemented carbide tool bits
Solid Carbide Insert Drill Bits For Foundation Drilling Tools And Mining Tools
button drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks. Besides, we can design customized thread button drill bits according to different drilling application, and custom drill bits are applicable to drill soft rock, loose-medium rock and hard rock.
Application of Drill bits inserts tungsten carbide buttons
Tungsten carbide drill bits are widely used in mining, sand,cement,metallurgy and hydropower engineering industries.
1. High stability, long life circle
2. Good abrasive and corrosion resistance
3. High quality and high hardness
4. Purity without recycled material
5. Fast delivery
6. Produced according to your requirements
7. Various type, blanks and polished (precision machined) mining bits.
8. OEM accepted
Recommended Carbide Grade
|Grade||Grain Size(%)||Binder||Hardness (HRA)||TRS(Mpa)||Density(g/cm3)||Grade Description||Application|
|Rock Drilling||Conical Bits||Oil Exploitation|
|PDK10.8||ultra coarse||6||89||2100||14.90-15.05||Can be used for bits of mining-tunnel and road planning bits. It has exccllenl toughness and thermal fatigue property.||●||●|
|PDK20.1||medium||8||89.5||2800||14.65-14.80||Can be used for making compacts of various percussion. DTH bils and tricone bits for drilling medium hard formation.||●|
|DK30.4||coarse||9||87.5||2800||14.55-14.70||Can be used for bits of mining and tunnelling, li has excellent toughness and Ihennal fatigue properly.||●||0|
|DK20||coarse||10||87.5||2800||14.40.-14.60||Can be used for bits of mining and tunnelling. It lias excellent toughness and thermal fatigue property.||●||〇|
|PDK35.4||coarse||10||87.5||2800||14.45-14.60||Can be used for bits of mining and tunnelling. It has excellent toughness and ihennal fatigue properly.||●||〇|
|PDK35.5||ultra coarse||10||86.6||2200||22.214.171.124||Can be used for bits and shield cutler of mining and tunnelling. It has excellent toughness and thermal fatigue property.||●||〇|
|DK40.2||coarse||11||86.8||2800||14.35-14.50||Can be used for bits and sliield culler of mining and tunnelling. It has excelleni toughness and thermal fatigue property.||●||〇|
|DK42.2||coarse||13||86.5||2800||14.15-14.30||Can be used for bits and shield cutler of mining and tunnelling. It las excellent toughness and thermal fatigue property||●|
|DK42.3||ultra coarse||13||86||2200||14.15-14.30||Can be used for bits and shield cutler of mining and tunnelling. It has excellent toughness and thermal fatigue property.||●||〇|
|DK45.2||coarse||15||85.6||2800||13.90-14.20||Can be used for bits and sliield cutler of mining and tunnelling. It has excellent toughness and thermal fatigue property.||●||〇|
● Recommended Grade
〇 Second Selection Grade
Cemented carbide can be used for making the drill bits/ end-mills / reamers; automobile special cutters, printed circuit board special cutters, engine special cutters, horologe processing special cutters, integral vertical milling cutter, graver and etc. Besides, they can be also used for making of cemented carbide stamping head, core bar and perforation tools.
Zhouzhou Jintai Cemented Carbide products will be packaged in PVX boxes- paper boxes - wooden boxes, then will be deliveried as per customers’ choices.
We can also packing our cemented carbide products as customers’ requirement.
To offer you a correct and fast quotation, your details in the following questions about the carbide you needed will help a lot:
1. carbide grade
2. carbide type and application
3. detailed dimensions(it is better to have a technical carbide drawing)
4. carbide surface treatment
5. other requirements
Once your inquiry reached us, a competitive quotation will reach you in 24 hours.
Zhuzhou JinTai cemented carbide co.,ltd speicialized in design and production of cemeted carbide prodcuts since 2001.
Factory of Zhuzhou JinTai cemented carbide co.,ltd covers more than 13,000 squre meters, located in the Zhuzhou city ,industrial city of Hunan province, China.
Our product includes cemented carbide cutting tools ,engineering components,forming tools,wear parts and related carbide saw materials. Our products are widely used in machinary, mining, electronics, construction,etc.
Q: Are you trading company or manufacturer ?
A: We are manufacturer of tungsten carbide since 2006. We can supply 20 tons tungsten carbide product per month. We can provide customized carbide products as per your requirements.
Q: How long is your delivery time?
A: Generally,it will take 7 to 25 days after order confirm.The specific delivery time depends on the specific product and the quantity you needed.
Q: Do you provide samples? iIs it free or charged?
A:Yes, we can offer a sample for free charge but the freight is at customers’ cost.
Q. Do you test all your goods before delivery?
A: Yes, we will do 100% test on our cemented carbide products before delivery.
Contact Person: Sales Manager